Adhesive
Additive for Adhesive 

Product Name

Typical Physical Properties

Dosage,%

Characteristic

Appearance

Active content,%

Coadd™ DF-012

Light yellow to yellow liquid

100

0.2~1.0

A high efficient,polymeric defoamer. It does not contain mineral oil nor silicone.The product has very good anti-foam and defoaming properties with good system compatibility. Mainly used in water-diluable resin and epoxy systems. It can also be used in systems of low viscosity, showing good compatibilty and no formation of crater and floating oil. It is also suitable for organic pigment slurries.

Coadd™ DF-022

Light yellow to yellow liquid

100

0.1-0.5

A defoamer based on modifed silicone with poreprties of fast defoaming, and strong defoaming micro-foams. It has very good compatibility with different paint systems. Broadly used in various aqueous systems as well as ink and adhesive systems. Can be used in wide range of temperature and pH values. Easy handling and good water dispersibility.

Coadd™ DF-024

Light yellow to yellow liquid

100

0.2~1.0

A defoamer based on modified silicone with balanced performance in defoaming and compatibility. Good broad applicability Strong micro-foam elimination. Broadly used in various water-borne coatings, inks, and adhesives. Also adaptvie to wide temperature and pH ranges. Good water dispersibility. Easy handling.

Coadd™ DF-028

White to light yellow turbid liquid

100

0.2~1.0

A defoamer based on modified silicone with balanced performance in defoaming and compatibility. Good broad applicability Strong micro-foam elimination. Broadly used in various water-borne coatings, inks, and adhesives. Also adaptvie to wide temperature and pH ranges. Good water dispersibility. Easy handling.

Coadd™ DF-035

Light yellow to yellow liquid

100

0.2~1.0

Silicone/mineral oil defoamer. Excellent anti-foam effect. Fast defoaming rate. Not sensitive to temperature changes and not affected by pH values. Good general applicability.

Coadd™ DF-1901

Semi-transparent turbid liquid

100

0.2~0.5

High-efficient defoamer based on modified silicone with fast defoaming rate and strong micro-foam elimination.Suitable for hard-to-defoaming systems and those with high emulsifier content. Good defoaming performance particularly in emulsified epoxy systems.Broadly used in various water-borne coatings, inks, and adhesives. Effective in broad temperature and pH ranges.


Specialty Emulsion for Adhesive

Product Name

Typical Physical Properties

Characteristic

Appearance

Solid,%

pH

MFFT,℃

Lamax™ 268

Milky white liquid

44±1

7.5±1

<0

Water-borne dry laminating adhesive. Has excellent wetting and adhesion properties on PP, PET and PE substrates. Fast drying and applicable to high-speed coating (200m/sec). Specially incorporated defoaming property assures high performance of the product. High initial adhesion.Laminated product can immediately go the next process with no need for further aging.

Copyright © POLYWILL Advanced Material Shanghai Co. Ltd

沪ICP备17​​​​​​020140号